Monday, June 13, 2011

Dragon wing experiments .....phase one

 These dragons are definitely out of my comfort zone . I had no idea how to make the wings and spent a day just looking at google pictures of different kinds of wings . It seems that most dragons are given ether bat like wings or pterodactyl wings .

For the smaller dragon , (which I started with needle felt wings), I decided to try leather bat like wings . I thought the larger dragons narrow wet felt body and needle felted scaled tummy looked very insectoid so I thought I would do more of a dragonfly wing .
 Above and below are the small dragon wings using some of the scrap leather I collect . I didn't do a rather sloppy job of cutting the leather strips that are covering the top edge and two projecting "spines" because I planned on covering that side with some fabric which ended up being a mistake as the fabric I chose was to thin . I kept the wire in place using some very strong double sided tape I picked up at Axman<---love that place for craft supplies . I left a bit of wire projecting out the edge of the wing and wrapped it with another AXman purchase called...."thread tape" . It's very thin, not sticky and bright white so I thought it would make a good claw . (If you've never heard of it, it's the stuff you wrap around pipe threads when you connect them to prevent leaks . )
 The above  (before trimming ), is the dyed chiffon that I adhered with and  coated with "glimmer modge podge" to the wired side of the wing .
 Above and below are the dragon fly wings . I began by cutting out a form to wrap the wire around so I could make sure and have the same basic shape and size....that is something that I don't do well just by "eying" it . On a side note....the material I used to make my form also works great for needle felting and you can get a huge piece for around $15 at your local home building store . It works much better then the cheap packing foam and is cheaper and less messy then pillow foam mats . Downside is that it's noisier .
My basic process needs a lot of work and a trip to the craft store . I want something that I can attach to the wire frame that is transparent AND that I can draw/paint the wing veins but it must be durable and shippable . The durable part is really important as is finding the best method to attach the wings to the dragon so they can easily be removed for shipping . Problems like this are what I thrive on so I have some fun to look forward to .

I also decide that I have to overcome my trepidation of using wire in my animals . I'm starting by using wire to make feet but more of that later .

Happy felting .

2 comments:

  1. Oh you've done a great job on the wings, the both suit each dragon , the dragonfly wings are awesome xoxo

    ReplyDelete

LinkWithin

Related Posts with Thumbnails